Carburetor Stack Cover Set- Red (pair)
€36.59The Original! Fits JayCee Enterprises 51.5mm IDA Carbs or 48 IDA’s running Jack’s Stacks and others measuring 3 5/8″ O.D.
Sold in Pairs
Made In Usa
Weber Stack Cover
Jet Doctor Kit – Weber IDF (one carb)
€29.64Plugged Idle Jets can result from dirt, and other debris getting into the carburetor, and pooling up in the top of the carburetor cover.
On this cover, there are two small holes that are used to take in extra air, in addition to the air that is sucked in through the velocity stacks. When excess debris gets through these holes, it ends up clogging the idle jets.
The Weber Jet Doctor blocks these holes, and provides a ‘snorkel’ to breathe fresh air from about an inch and half above the top of the carburetor cover, thus eliminating the ability for the debris to seep into carburetor’s idle jets.
An O-Ring gasket also provides a tight seal, to make certain that no debris can get inside the idle jets, and ruin your day.
Upgrade Kit , Weber IDF – fits 40mm IDF (2 carburetors) by CB Performance
Original price was: €150.41.€75.00Current price is: €75.00.Power up your Weber’s with CB’s new IDF Update Kit. You’ll get increased torque, acceleration, and more top end with this all new energy package. The IDF Update Kit features horizontal spray bars that replace standard bulls eye secondary venturi to produce improved atomisation through the power band. Longer taper flow main venturi to improve airflow and special calibration are also included. Each Weber Update Kit also includes a complete gasket and O-ring kit. It’s not black magic, just another example of CB’s creative engineering and dedication to true performance.
IDF Update Kits are available to fit 40 and 44 mm Weber IDF Carburetors. Each kit is designed to convert two carburetors to fast track horizontal spray bar discharge. This is a straightforward parts replacement installation. Machining, drilling, or altering of the carburetors is not required. If you can get your tool box open, you can quickly pump up your horsepower with this ‘easy to install’ kit.
**Will not fit early IDF Weber’s with cam roller accelerator pump arm without modification**
Features:
34 Venturis
1.80 Air Correction Jets
1.60 Main Jets
Main Jet,Weber – IDF IDA DCOE (specify size)
€5.49Main Gas Jets for Weber IDF, IDA, and DCOE carburetors.
Please specify exact sizes when placing an order for Jets & Venturi (1.15, 1.20, 1.25, 1.30 ,1.35, 1.40, 1.45, 1.50, 1.55, 1.60, 1.65, 1.70, 1.75, 1.80, 1.85, 1.90, 2.00, 2.05, or 2.10)
Made in USA
1.15
1.20
1.25
1.30
1.35
1.40
1.45
1.50
1.55
1.60
1.65
1.70
1.75
NETT NETT
Air Mixture Screw ,Weber IDF (each)
€7.28Weber IDF Mixture Screws.
Sold each.
Main Jets also available
Manifold Kit Weber, IDF & DRLA (DP OFFSET)
€175.00Manifold – Dual Dellorto DRLA & Weber IDF – Dual Port Type-1 complete with gasket set- (offset)
Adjusting screws facing out-full kit with gaskets cross linkage hex bar link pack, and air filters
Looking for more power?
Special intake manifolds are now available to fit most popular VW applications. Increased power, quick throttle response, and believe it or not, improved gas mileage can be the result of properly installed dual carbs.
Sold in Pairs.
Hardware and Gaskets Included.
Made In Usa
WE can do the installation & or tuning for you too !!
Webers in stock 40 & 44s all jet sizes gaskets x linkages & spares
Manifold ONLY for Weber ICT. Type 4 engines-Porsche- 356/912 ,T2 1.7 Tranporter-VW 411/412
Original price was: €295.00.€50.00Current price is: €50.00.Stock Clearence Manifolds as in pic -nothing else included
carburetor, weber,Air Cleaner Assembly (DRLA/IDF LH or RH
Original price was: €110.00.€95.00Current price is: €95.00.Just let us know if you need a 1.5″—-3.5 ” air filter all heights stocked
Air Filter Element , Weber , IDF, 1 1/2″)
Original price was: €27.50.€20.00Current price is: €20.00.Air Cleaner Element only – Weber all 4 1/2 X 7 X 1 1/2 – 1 1/2″
Each
Very good in Type 3 Vws ( Notch, Fast & Square back) under engine cover where space is tight